HOVER Heat Press

Model No.: MAX-HOVER

Size: 15″*15″/16″*20″

Description:

The Hover Heat Press has all of the features of the Auto Open Clam with one unique difference: the upper platen hovers over the garment to ensure brighter colors and a stronger bond between ink and the garment.

With this breakthrough technology, you never have to worry about direct-to-garment ink residue on your platen. Can also be used for any type of traditional heat-applied graphics.

 

Feature:

Magnetic Assist Lock Down

Available size: 38x38cm, 40x50cm

Auto Open Feature

Digital Time & Temperature Controls

Cycle Counter for Tracking Production Quantities

Two modes – one for contact and the second for pressure

Generates maximum pressure

Under-center pressure platen

CE approved

Quick-change lower platen

Non-stick coated heater – stress relieved to prevent warping

Cast-in tubular element every 2.5″ to eliminate cold spots

3/16″ laser-quality Iron framework

Heavy-duty pin & bushing pivot points

3/4″ upper flotation heat platen

Wide opening for easy layout

Available in 110v or 220v

Space-saving clamshell design

Specially designed for curing ink

 

Specification:

Machine Type: Hover, Auto Release, Clamshell

Platen Size: 15″*15″/16″*20″           (38*38cm/40*50cm)

Controller: GY-06 Digital Time & Temp. Control

  • Cycle Counter for Tracking Production Quantities
  • Cycle Done Alarm

Magnetic Assist Lock Down System

Max. Hover Space: Up to 10mm

Printable Articles: Up to 5mm Thickness

Opening Angle: 50 degrees

Gas Spring Control: Yes

Voltage: 120V/ 220V

Power: 1750W/ 1800W

Time Range: 0-999 sec

Maximum Temp: 225 C

Temperature Accuracy: ±0.5%

Packing Size: 54*88*57cm

Gross Weight: 60kg

 

 

Heat Platen Test:

Each Single Copper sheathed heating rod is tested before it is cast in an aluminum alloy or Mica Sheet. These heating rods are comparable to those found in industrial ovens that heat up quickly, work efficiently and last many years. With our industrial quality heat castings, you can get five years worry free warranty.

 

 

Quality Control on Finished Machine:

All Microtec heat presses are strictly tested under the following procedures before shipping out.

1) Turn on the machine, let it heating up to 200 degree Celsius.

2) Keep the temperature stay at 200 degree Celsius for at least 20 minutes

 

The machine is packed in strong carton package and provide with manual.

 

Machine Warranty:

So Microtec offers FREE SPARE PARTS with quantity order and the following warranty:

*Free lifetime technical support on all heat presses.

*One-year warranty on entire press & parts.

*Five-year warranty on castings and welds.

*Five-year warranty on heat platen.

*Half- year warranty on mug, plate and cap heaters.

 

Application:

  1. For T-shirt, Puzzle, Mouse Pad, Bag, Cushion etc after printing with Digital printer.

2.     Normal Sublimation Transfer Printing.

 

More Related Products

Enquiry